文献类型：期刊文献

中文题名：基于Aspen Plus的1,2-二氯乙烷废水汽提脱溶过程模拟与优化

英文题名：Simulation and Optimization of Stripping Process of 1,2-dichloroethane Wastewater based on Aspen Plus

作者：张振科[1];沈杰[1];张明亮[2]

第一作者：张振科

机构：[1]浙江沙星科技有限公司,浙江临海317000;[2]新乡学院能源与燃料研究所,河南新乡453000

第一机构：浙江沙星科技有限公司,浙江临海317000

年份：2021

期号：16

起止页码：102-104

中文期刊名：化工管理

外文期刊名：Chemical Enterprise Management

收录：国家哲学社会科学学术期刊数据库

语种：中文

中文关键词：1,2-二氯乙烷;汽提;流程模拟;Aspen Plus;废水

外文关键词：1,2-dichloroethane;stripping;process simulation;Aspen Plus;wastewater

摘要：运用Aspen Plus流程模拟软件,探讨了某酸化萃取工段1,2-二氯乙烷含盐废水汽提分离工艺过程的汽提塔塔板数、蒸汽流量、废水进料温度、操作压力对塔底废水中1,2-二氯乙烷质量分数的影响。优化了汽提工艺流程,同时,考察了不同蒸汽流量条件下各主要流股参数的影响。结果表明,塔板数为20块,废水进料温度为100℃,蒸汽流量为540 kg/h,常压条件下汽提后的废水中1,2-二氯乙烷质量分数可达到3.85×10^(-5),1,2-二氯乙烷去除率达到99.57%。
Using Aspen Plus process simulation software,the effects of stripper plate number,steam flow rate,feed temperature and operating pressure on the concentration of 1,2-dichloroethane in the bottom of the tower in the stripping process of brine containing wastewater from an acidizing extraction section were studied.The stripping process was optimized and the effects of main flow parameters on different steam flow rates were investigated.The results show that the mass fraction of 1,2-dichloroethane can reach 3.85×10^(-5) and the removal rate of 1,2-dichloroethane can reach 99.57%when the number of trays is 20,the feed temperature of wastewater is 100℃and the steam flow rate is 540 kg/h.