文献类型：期刊文献

中文题名：不锈钢外壳温挤压模具的可靠性分析方法研究

英文题名：Study on the Reliability Analysis Method of the Extrusion Die of Stainless Steel Shell

作者：张国智[1];付会凯[1]

第一作者：张国智

机构：[1]新乡学院机电工程学院

第一机构：新乡学院机电工程学院

年份：2014

期号：1

起止页码：235-237

中文期刊名：机械设计与制造

外文期刊名：Machinery Design & Manufacture

收录：CSTPCD;;北大核心:【北大核心2011】；

基金：河南省教育厅自然科学研究计划项目(2011C460002)

语种：中文

中文关键词：预应力;凹模;工作性能;温挤;蒙特卡罗扩展;可靠性

外文关键词：Pre--Stress; Die; Performance; Warm Extrusion; Extension of the Monte Carlo Method; Reliability

摘要：研究温挤模具预应力下其材料参数及几何参数对其工作性能的影响,提出了不锈钢外壳温挤时模具的可靠性仿真分析方法。在基于Deform对不锈钢外壳温挤成形模拟基础上,用VC编写程序提取模具应力分析结果及温度场分析结果,进而在ANSYS中建立模具的热力耦合的有限元分析模型,此外,基于概率有限元方法中的蒙特卡罗扩展法分析结果,凹模侧壁变形对凹模底部厚度最为敏感,而对模具材料的弹性模量最为不敏感,应用该方法为模具的可靠性分析提供了方法和依据。
The influence of die material parameters and geometry parameters to the performance of reliability of warm extrusion dies with pre-stress was studied, and its reliability simulation analysis method was proposed. Based on the warm extrusion forming simulation of the stainless steel shell in Deform, the analysis results of the stress and temperature in Deform was extracted with the program compiled with VC so as to establish the thermal couplingfinite element analysis model of the die in ANSYS. Moreover, based on the results of the probability extension of the Monte Carlo method, research results show that the die wall deformation is the most sensitive to its bottom thickness and the most insensitive to its elastic modulus. The method and basis are supported for the reliability analysis of the dies.