登录    注册    忘记密码

详细信息

大型智能化建筑中的照明设备光调节设计方法    

Large Intelligent Lighting Light Control Design Method in the Construction of Research

文献类型:期刊文献

中文题名:大型智能化建筑中的照明设备光调节设计方法

英文题名:Large Intelligent Lighting Light Control Design Method in the Construction of Research

作者:苗长芬[1];炎士涛[2]

第一作者:苗长芬

机构:[1]新乡学院计算机与信息工程学院;[2]河南科技学院信息工程学院

第一机构:新乡学院计算机与信息工程学院

年份:2015

卷号:32

期号:7

起止页码:369-372

中文期刊名:计算机仿真

外文期刊名:Computer Simulation

收录:CSTPCD;;北大核心:【北大核心2014】;CSCD:【CSCD_E2015_2016】;

语种:中文

中文关键词:大型智能化建筑;照明设备;光调节;自适应

外文关键词:Intelligent buildings; Lighting equipment; Light regulation; Adaptive

摘要:在大型智能化建筑中,对照明设备的发光进行合理调节能够有效提高发光效率,提高人们的视觉舒适度,降低能源成本。传统的光调节方法没有充分考虑外界动态光的变化,造成发光效率降低。为此,提出一种基于自适应PID的大型智能化建筑中的照明设备发光调节方法。对照明设备的驱动电源进行了硬件上的设计,通过采样电阻将将电流信号转换为电压信号,经过A/D转换处理,然后信号进入控制器,利用控制信号实现对照明设备的亮度调节。实验结果表明,利用改进算法进行大型智能化建中的照明设备发光的调节,能够有效提高发光效率,效果令人满意。
In intelligent buildings,the lighting equipment of the light-emitting reasonable adjustment can effectively improve the luminous efficiency,enhance people 's visual comfort,and reduce energy costs. The traditional light adjustment method does not fully consider the dynamic changes in the light,which reduces the luminous efficiency. A kind of light regulation method of lighting equipment is presented based on adaptive PID for large intelligent buildings. The driving power supply hardware of lighting equipment is designed,the current signal converts to voltage signal by using sampling resistor,and through A / D conversion processing,the signal enters the controller,and then the control signal is used to adjust the brightness of the lighting equipment. Experimental results show that the improved algorithm can effectively improve the luminous efficiency.

参考文献:

正在载入数据...

版权所有©新乡学院 重庆维普资讯有限公司 渝B2-20050021-8 
渝公网安备 50019002500408号 违法和不良信息举报中心