详细信息
固体超强酸SO_4^(2-)/Fe_2O_3-TiO_2催化合成癸二酸二乙酯的研究
STUDY ON SYNTHESIS OF DIETHYL SEBACATE WITH SOLID SUPERACID CATALYST SO_4^(2-)/Fe_2O_3-TiO_2
文献类型:期刊文献
中文题名:固体超强酸SO_4^(2-)/Fe_2O_3-TiO_2催化合成癸二酸二乙酯的研究
英文题名:STUDY ON SYNTHESIS OF DIETHYL SEBACATE WITH SOLID SUPERACID CATALYST SO_4^(2-)/Fe_2O_3-TiO_2
作者:董壮龙[1];郭俊胜[1]
机构:[1]河南新乡师范高等专科学校化学系
第一机构:新乡学院化学化工学院
年份:2003
期号:1
起止页码:23-25
中文期刊名:精细石油化工
外文期刊名:Speciality Petrochemicals
收录:CSTPCD;;Scopus;北大核心:【北大核心2000】;CSCD:【CSCD_E2011_2012】;
语种:中文
中文关键词:催化合成;癸二酸二乙酯;研究;固体超强酸催化剂;SO4^2-/Fe2O3-TiO2;催化酯化
外文关键词:solid superacid catalyst SO2- _4/Fe_2O_3-TiO_2; diethyl sebacate; catalytic esterification
摘要:研究了用固体超强酸SO2 -4/Fe2 O3 TiO2 为催化剂 ,由癸二酸和乙醇反应合成癸二酸二乙酯的最佳工艺条件。结果表明 ,当n(醇 )∶n(酸 ) =4 .0∶1,催化剂用量为酸质量的 5 % ,反应时间为 3.5h ,酯的产率可达96 %。该工艺产率高 ,反应时间短 ,无腐蚀无污染 ,催化剂可回收、活化、重复使用 10次。
The optimum technological conditions of the synthesis of diethyl sebacate by the reaction of sebacic acid and ethyl alcohol with SO 2- _4/Fe_2O_3-TiO_2 as catalyst were studied. The results showed that the yield was over 96% when molar ratio of ethyl alcohol to sebacic acid was 4.0∶1, reflux reaction time was 3.5 h and amount of catalyst was 5% of sebacic acid.This process has many advantages such as higher yield, simple procedure,shorter reaction time, non-corrosive,non-pollution, and the catalyst could be recovered, reactivated and reused for 10 times.
参考文献:
正在载入数据...