详细信息
文献类型:期刊文献
中文题名:滤清器底座金属型铸造工艺及模具设计
英文题名:Metal Mold Casting Process and Mould Design of Filter Base
作者:王赟[1];丁鹏[1]
第一作者:王赟
机构:[1]新乡学院机电工程学院,河南新乡453003
第一机构:新乡学院机电工程学院
年份:2021
卷号:70
期号:1
起止页码:104-108
中文期刊名:铸造
外文期刊名:Foundry
收录:CSTPCD;;Scopus;北大核心:【北大核心2020】;
语种:中文
中文关键词:燃油滤清器底座;金属型铸造;综合分型
外文关键词:fuel filter base;metal mold casting;combined parting surface
摘要:根据燃油滤清器底座铸件的结构特点、生产要求等进行了重力金属型铸造工艺设计,确定了起模斜度、机加工余量等参数以及浇注系统和冒口的结构。模拟分析表明,在该铸造工艺方案下铸件充型良好。铸型选用了综合分型式金属型结构,铸件内腔采用树脂砂芯。经生产实践验证,所设计的模具结构合理、工作可靠,生产的铸件质量符合要求。
The metal mold casting process of fuel filter base was designed according to its structure characteristics and production requirements, and the draft, machining allowance, the gating system and riser structure were determined. The simulation analysis shows that the mold filling is good under this casting process. The mold structure with combined parting surface was selected and the sand core was adopted to form the complex inner cavity structure of the casting. The production practice revealed that the designed mold structure is reasonable and reliable, and the quality of the produced castings can meet the requirements.
参考文献:
正在载入数据...