详细信息
文献类型:期刊文献
中文题名:固载硫酸氢钠催化合成肉桂酸乙酯的研究
英文题名:Catalytci synthesis of ethyl 3-phenylacrylate by supported sodium bisulfate
作者:张应桂[1]
第一作者:张应桂
机构:[1]平原大学化学与环境工程学院
第一机构:新乡学院
年份:2006
卷号:35
期号:11
起止页码:844-845
中文期刊名:应用化工
外文期刊名:Applied Chemical Industry
收录:CSTPCD;;CSCD:【CSCD_E2011_2012】;
语种:中文
中文关键词:硫酸氢钠;硅胶;肉桂酸乙酯;酯化
外文关键词:sodium bisulfate ; silica gel ; ethyl 3-phenylacrylate ; estefification
摘要:用硅胶负载硫酸氢钠,催化合成肉桂酸乙酯,考察了催化剂用量、醇酸摩尔比、反应时间等因素对酯化率的影响,以及催化剂的重复使用、催化机理等。结果表明,最佳反应条件为:3-苯基丙烯酸0.2 mol,乙醇0.6 mol,催化剂用量0.75 g,回流反应时间75 m in,收率为91.43%。
The synthesis of ethyl 3-phenylacrylate was performed by supported sodium bisulfate. The effect of amount of catalyst, mole ratio of alcohol/acid, reaction time, etc. on esterification rate as well as reused of catalyst, catalysis mechanism were investigated. The optimum reaction conditions were as follows:3-phenylacrylate 0.2 mol, alcohol 0. 6 mol, mass of catalyst was 0. 75 g and reaction time was 75 min. The yield was up to 91.43%.
参考文献:
正在载入数据...