详细信息
Study on the design method of impeller on low specific speed centrifugal pump ( EI收录)
文献类型:期刊文献
英文题名:Study on the design method of impeller on low specific speed centrifugal pump
作者:Liu, Jianhua[1]; Zhao, Xiangyang[2]; Xiao, Miaoxin[1]
第一作者:刘建华
通讯作者:Liu, Jianhua
机构:[1] Mechanical Engineering Institute, Xinxiang University, Eastern Jin Sui avenue, Xinxiang, China; [2] Department of Automobile Engineering, Henan Mechanical and Electrical Engineering College, Ping Yuan Rd, Xinxiang, China
第一机构:新乡学院机电工程学院
年份:2015
卷号:9
期号:1
起止页码:594-600
外文期刊名:Open Mechanical Engineering Journal
收录:EI(收录号:20160601888537);Scopus(收录号:2-s2.0-84956981910)
语种:英文
外文关键词:Centrifugal pumps - Computer simulation - Computer software - Flow patterns - Impellers - Navier Stokes equations - Numerical methods - Numerical models - Pumps - Turbulence models
摘要:In this work, the comparative study has been done for five kinds of design methods of the low specific speed centrifugal pump impeller adopted numerical simulation method by software of Fluent, so that the problems can be solved. Many different design methods exists for the low specific speed centrifugal pump impeller, which caused the design effect difficult to control. The numerical simulation method based on the Reynolds time averaged N-S equations (RANS) and RNG κ-Ε turbulence models. Results revealed the inner flow pattern of these impeller, and these results were verified by external characteristic experiment. The research results showed that the design method, which adopted compound impeller with short blades and these short blades turned to the suction surface of long blades. Results proved that its flow distribution is even and external characteristic curve is more ideal. ? Liu et al.
参考文献:
正在载入数据...