成果/Result
- Improved cell nucleating effect of partially melted crystal structure to enhance the microcellular foaming and impact properties of isotactic polypropylene被引量:27收藏
- 作者:Fu, Long Shi, Qiankun Ji, Youxin Wang, Guanglong Zhang, Xiaoli Chen, Jingbo Shen, Changyu Park, Chul B.
- 机构:Zhengzhou Univ;Xinxiang Univ;Univ Toronto
- 来源:JOURNAL OF SUPERCRITICAL FLUIDS 2020
- 关键词:Isotactic polypropylene Partially melted crystal structure Microcellular foam Cell nucleating Impact strength
- Effects of microstructure characteristics on the mechanical properties and elastic modulus of a new Ti-6Al-2Nb-2Zr-0.4B alloy被引量:9收藏
- 作者:Yang, Zhijun Cao, Junhui Yu, Weixin Hou, Shusen Wang, Guanglong Lang, Shaoting Ding, Peng
- 机构:Xinxiang Univ
- 来源:MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 2021
- 关键词:Titanium alloys TiB phase Mechanical properties Elastic modulus Microstructure
- Hot Deformation Behavior and Processing Maps of a New Ti-6Al-2Nb-2Zr-0.4B Titanium Alloy被引量:8收藏
- 作者:Yang, Zhijun Yu, Weixin Lang, Shaoting Wei, Junyi Wang, Guanglong Ding, Peng
- 机构:Xinxiang Univ
- 来源:MATERIALS 2021
- 关键词:titanium alloy thermal deformation constructive equation processing maps
- Reinforcing and toughening isotactic polypropylene through shear-induced crystallization and -nucleating agent induced crystallization被引量:4收藏
- 作者:Wang, Guanglong Hou, Shusen Cao, Junhui Ding, Peng Shen, Junfang Chen, Jingbo
- 机构:Xinxiang Univ;Zhengzhou Univ
- 来源:JOURNAL OF POLYMER RESEARCH 2018
- 关键词:Crystalline morphologies Reinforcement Toughness Sequential co-injection molding (SCIM) Isotactic polypropylene (iPP)
- Microstructural characteristics and mechanical properties of Ti-6Al-2Nb-2Zr-0.4B alloy welded joint using tungsten inert gas welding被引量:3收藏
- 作者:Yang, Zhijun Li, Jingxian Hou, Shusen Cao, Junhui Wang, Guanglong Lang, Shaoting Ding, Peng
- 机构:Xinxiang Univ
- 来源:JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T 2022
- 关键词:Titanium alloys Tungsten inert gas welding Welded joint Microstructure Mechanical properties
- Plywood-like structures of injection-molded polypropylene被引量:1收藏
- 作者:Wang, Guanglong Cao, Junhui Hou, Shusen Ding, Peng Yu, Weixin Yang, Zhijun Chen, Jingbo
- 机构:Xinxiang Univ;Zhengzhou Univ
- 来源:POLYMER ENGINEERING AND SCIENCE 2021
- 关键词:crystal structures injection molding mechanical properties orientation poly(propylene) (PP) structure-property relations
- 血管支架镁合金表面氟化镁涂层的制备与性能被引量:1收藏
- 作者:侯树森 郭贵中 王广龙 李文星 李悦
- 机构:新乡学院机电工程学院
- 来源:《特种铸造及有色合金》 2020
- 关键词:血管支架 镁合金 氟化镁涂层 耐腐蚀性
- 摘要:针对医用镁合金在生理环境下降解过快的问题,用化学转化法在镁合金表面制备了氟化镁涂层,以减缓镁合金血管支架的降解速率。分析了HF酸浓度、处理时间对转化涂层的成分、脆性以及耐腐蚀性的影响。结果表明,氟化镁涂层的厚度随HF酸处...
- Deformation Behavior, a Flow Stress Model Considering the Contribution of Strain and Processing Maps in the Isothermal Compression of a Near-alpha Ti-3.3Al-1.5Zr-1.2Mo-0.6Ni Titanium Alloy被引量:0收藏
- 作者:Yu, Weixin Cao, Junhui Hou, Shusen Wang, Guanglong Li, Yue Lang, Shaoting
- 机构:Xinxiang Univ
- 来源:MATERIALS 2022
- 关键词:titanium alloy compression tests deformation behavior model processing map
- 等规聚丙烯顺序共注射制件的结构与性能被引量:0收藏
- 作者:王广龙 沈俊芳 侯树森 陈静波 申长雨
- 机构:新乡学院机电工程学院;郑州大学材料科学与工程学院;郑州大学橡塑模具国家工程研究中心
- 来源:《高分子材料科学与工程》 2017
- 关键词:顺序共注射成型 等规聚丙烯 结晶形态 柱晶 力学性能
- 摘要:采用顺序共注射成型和传统注射成型对等规聚丙烯进行成型,分别利用偏光显微镜、二维广角X射线衍射以及万能试验机测试制件的结晶形态和力学性能。结果表明,顺序共注射成型过程中表芯熔体之间的强烈剪切使得表芯材料界面处出现柱晶,并且...
- The microstructure and impact toughness of vacuum electron beam welded joints of a highly alloyed dual phase titanium alloy被引量:0收藏
- 作者:Yu, Weixin Wang, Guanglong Gao, Fuyang Cao, Junhui Hou, Shusen Zhang, Ye Lv, Yifan
- 机构:Xinxiang Univ;Northwestern Polytech Univ;Luoyang Ship Mat Res Inst
- 来源:VACUUM 2024
- 关键词:Vacuum electron beam welding TC18 titanium alloy Microstructure Impact toughness
- Facile fabrication of amorphous NiFeP nanosheets to promote urea oxidation reaction for energy-saving hydrogen production被引量:0收藏
- 作者:Cao, Junhui Wang, Guanglong Hou, Shusen Yu, Weixin Yang, Zhijun Wu, Yihui
- 机构:Xinxiang Univ;Jiangsu Univ Sci & Technol;Foshan Southern China Inst New Mat
- 来源:JOURNAL OF MATERIALS SCIENCE 2023
- 关键词:Activation energy - Electrolysis - Electronic structure - Energy conservation - Hydrogen production - Iron compounds - Metabolism - Nanosheets - Nickel - Phosphorus - Potassium hydroxide - Urea