成果/Result
- Effects of microstructure characteristics on the mechanical properties and elastic modulus of a new Ti-6Al-2Nb-2Zr-0.4B alloy被引量：9收藏
- 作者：Yang, Zhijun Cao, Junhui Yu, Weixin Hou, Shusen Wang, Guanglong Lang, Shaoting Ding, Peng
- 机构：Xinxiang Univ
- 来源：MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 2021
- 关键词：Titanium alloys TiB phase Mechanical properties Elastic modulus Microstructure
- Hot Deformation Behavior and Processing Maps of a New Ti-6Al-2Nb-2Zr-0.4B Titanium Alloy被引量：8收藏
- 作者：Yang, Zhijun Yu, Weixin Lang, Shaoting Wei, Junyi Wang, Guanglong Ding, Peng
- 机构：Xinxiang Univ
- 来源：MATERIALS 2021
- 关键词：titanium alloy thermal deformation constructive equation processing maps
- Reinforcing and toughening isotactic polypropylene through shear-induced crystallization and -nucleating agent induced crystallization被引量：4收藏
- 作者：Wang, Guanglong Hou, Shusen Cao, Junhui Ding, Peng Shen, Junfang Chen, Jingbo
- 机构：Xinxiang Univ;Zhengzhou Univ
- 来源：JOURNAL OF POLYMER RESEARCH 2018
- 关键词：Crystalline morphologies Reinforcement Toughness Sequential co-injection molding (SCIM) Isotactic polypropylene (iPP)
- Microstructural characteristics and mechanical properties of Ti-6Al-2Nb-2Zr-0.4B alloy welded joint using tungsten inert gas welding被引量：3收藏
- 作者：Yang, Zhijun Li, Jingxian Hou, Shusen Cao, Junhui Wang, Guanglong Lang, Shaoting Ding, Peng
- 机构：Xinxiang Univ
- 来源：JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T 2022
- 关键词：Titanium alloys Tungsten inert gas welding Welded joint Microstructure Mechanical properties
- Magnetic Properties and Biocompatibility of Different Thickness (Pd/Fe)(n) Coatings Deposited on Pure Ti Surface via Multi Arc Ion Plating被引量：2收藏
- 作者：Yang, Zhijun Li, Junjie Li, Jinghua Zhang, Binbin Li, Jingxian Sheng, Shizhong Ding, Peng
- 机构：Xinxiang Univ;China Aviat Lithium Battery Technol Co Ltd;Henan Univ Sci & Technol;Wenzhou Univ
- 来源：MATERIALS 2022
- 关键词：(Fe Pd)(n) coatings pure Ti magnetic blood compatibility histocompatibility
- 金属水龙头阀体压铸模设计被引量：1收藏
- 作者：王赟 丁鹏
- 机构：新乡学院机电工程学院
- 来源：《特种铸造及有色合金》 2018
- 关键词：压铸模 水龙头阀体 弧形抽芯 自动脱螺纹
- 摘要：以水龙头阀体铸件为研究对象,在分析铸件压铸工艺的基础上,结合选用的压铸设备,采用UG软件进行了压铸模具的设计。针对压铸件的复杂内部结构,模具中设计了斜导柱侧抽芯机构、自动脱螺纹机构以及齿轮齿条弧形抽芯机构。本模具设计可为...
- 滤清器底座金属型铸造工艺及模具设计被引量：1收藏
- 作者：王赟 丁鹏
- 机构：新乡学院机电工程学院
- 来源：《铸造》 2021
- 关键词：燃油滤清器底座 金属型铸造 综合分型
- 摘要：根据燃油滤清器底座铸件的结构特点、生产要求等进行了重力金属型铸造工艺设计,确定了起模斜度、机加工余量等参数以及浇注系统和冒口的结构。模拟分析表明,在该铸造工艺方案下铸件充型良好。铸型选用了综合分型式金属型结构,铸件内腔采...
- Plywood-like structures of injection-molded polypropylene被引量：1收藏
- 作者：Wang, Guanglong Cao, Junhui Hou, Shusen Ding, Peng Yu, Weixin Yang, Zhijun Chen, Jingbo
- 机构：Xinxiang Univ;Zhengzhou Univ
- 来源：POLYMER ENGINEERING AND SCIENCE 2021
- 关键词：crystal structures injection molding mechanical properties orientation poly(propylene) (PP) structure-property relations
- Magnetic Properties and Biocompatibility of Different Thickness (Pd/Fe)n Coatings Deposited on Pure Ti Surface via Multi Arc Ion Plating被引量：0收藏
- 作者：Yang, Zhijun Li, Junjie Li, Jinghua Zhang, Binbin Li, Jingxian Sheng, Shizhong Ding, Peng
- 机构： School of Mechanical and Electrical Engineering; China Aviation Lithium Battery Technology Co.; School of Medical Technology and Engineering; School of Mechanical and Electrical Engineering
- 来源：Materials 2022
- 关键词：Titanium alloys - X ray diffraction - Energy dispersive spectroscopy - Magnetic properties - Morphology - Scanning electron microscopy - Blood - Saturation magnetization - Iron alloys - Binary alloys - Biocompatibility - Remanence - Thickness measurement
- 大容量冷柜推拉门边条一模两腔注塑模设计被引量：0收藏
- 作者：周慧琳 丁鹏 于汇泳
- 机构：河南工学院材料科学与工程学院;新乡学院机电工程学院;河南工学院车辆与交通工程学院
- 来源：《当代旅游：下旬刊》 2019
- 关键词：一模两腔 浇注系统 侧向分型
- 摘要：针对大容量冷柜推拉门边条塑料件的结构特点及其装配使用要点,详细分析其注塑成型工艺,并确定注塑模设计方案。通过生产验证,能够满足生产需求,对同类产品的模具设计有一定的参考价值。
